Eped powerboard elektrische step

36V-30Ah LiFePo4 Pakket

Bekijk uw winkelwagen

BatteryPack van 20Ah Lithium

Accupack opstelling elektro motor step:

  • 1x Akkupack 36V - 20Ah inkl. Aansluitpolen

  • Schok en triling bestendig

  • Geen explosiegevaar bij overladen

  • Ingeboude BMS (Batterie Managment System)

  • Zonder geheugen effect

  • Geen Peukert Effect

  • Aluminium behuizing

  • Bereik ca. 40km

Technische Specificaties:

  • 36V  x 20Ah = 720 Wh battery capacity
  • Lithium accu inclusief interne 30A BMS
  • Materiaal: LiFePo4
  • Nominaal Voltage: 36V
  • Nominale capaciteit: 20Ah
  • incl. oplaadpunt en aansluitstekker
  • Afmetingen (LxBxH) 280 x 145 x 110 mm
  • Gewicht: 7,36 kg incl Aluminimum behuizing
  • Standaard laadstroom :: 5 A
  • Max. Laad stroom: 10A
  • Continue afvoer: 30A
  • Piekvermogen: 60A
  • Laadtemperatuur bereik:0 ~ 50 C
  • Ontlading temperatuurbereik: -20 C ~ 50 C
  • Opslag: -20 C ~ 50 C
  • Levensduur: ca.1500 laadcycli tot 80%
  • Bereik op 1 accuvulling 50+ km

Afmeting:

  • Lengte 30.0 cm
  • Breedte 21.0 cm
  • Hoogte 10.0 cm

PRIJS 689.00 euro

koop nu

 

meer info: Peukert's law
http://en.wikipedia.org/wiki/Peukert's_law

 

back Elektrische step onderdelen overzicht

back Prijslijst steponderdelen

terug naar prijslijst

 

 

The LiFePo4 battery has a voltage of 36V and a capacity of 20Ah. Compared to standard lead-acid batteries the Lithium battery does have lots of advantages. For example the weight - its just approx 50% of a lead-acid battery, also the capacity with 20Ah is much more than the capacity of normal lead-acid batteries with just 12Ah which results in a much longer total range of the scooter. By using standard lead-acid batteries the total distance with 36V-500watt model is about 25 km - this can be increased up to 40 km by switching to Lithium batteries.

Many people might now think all sounds good but Lithium batteries are incredibly expensive and are scared to buy one - we need to tell you that the LiFePo4 battery technology is just a lot more expensive when not looking at the details. As soon as you go into the details you need to compare also the number of possible loading cycles & their capacity with each other. The standard lead acid battery does allow approx 250 loading cycles (number of times that battery can be recharged until battery has to be replaced by a new one). A LiFePo4 Lithium battery does allow approx. 1.200 loading cycles - if you now compare those details the result will be as follows:

Lead-Acid battery:
250 loading cycles x 25 km distance = 6.250 km total distance over battery lifetime

Lithium battery:
1.200 loading cycles x 40 km distance = 48.000 km total distance over battery lifetime

Now lets compare these results with each other - 48.000 : 6.250 = 7,68 times more output from Lithium battery compared to the lead-acid one by just having 3 1/2 times higher price which makes clear that over their whole liftetime the LiFePo4 battery is much more efficient & cheaper than the Lead-Acid ones.

Product update 2016:
This battery block is now built in a luxury aluminum case. The big advantage of our brand new aluminum case is the easy access to all built in components such as the BMS which easily can be checked in case of failures. The new battery case also has a 25 pin D-Sub connector by which each single cell can be accessed & measured. In case of unbalanced cells the whole battery pack can also be balanced by using our special lithium balancing chargers in order to gurantuee longest possible lifetime and performance.

Article details:

  • Lithium battery pack with built in BMS
  • sizes: 280 x 145 x 110 mm (LxBxH)
  • weight: 7,36 kg
  • Voltage 36 Volt
  • Capacity 20Ah
  • 36V  x 20Ah = 720 Wh battery capacity.
  • maximum discharge current 30A
  • LifePo4 technology

Please note! Our LiFePo4 batteries cannot be charged by using the standard charging socket at your scooters frame. The reason for that is the controller unit, which cannot be used to charge LiFePo4 batteries. The battery pack has to be simply connected directly with the LiFePo4 charger which is coming together with the battery. The required socket and everything is already assembled at the battery pack itself. This means all you need comes with the battery and charging process is as simple as before just a bit different than it used to be.

 

steponderdeel: accupack LiFePo4 48V-20Ah

back to top


         

home FAQ contact sitemap

2006-2018 © EPED.NL - info@eped.nl - Tel. 065-3235234 - Fax: 087-7849490 - Maanderweg 52b, 6711NE, EDE


R1 Powerboard | D1 Powerboard | C1 Powerboard | K1 Powerboard